Accesorios SparkFun

Resultados: 944
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Producto
Tipo
SparkFun Accesorios SparkFun LIDAR-Lite v3
Hoja de datos
79En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun The BT-T009 antenna is a small light weight anti-vandal permanent mount GNSS/GPS L1/L2/L5 multi-band antenna for GPS GLONASS Galileo and BeiDou constellations. Designed more for permanent mount applications requiring four screws to be installed
Hoja de datos
9En existencias
Min.: 1
Mult.: 1
Antennas Helical Antenna
SparkFun Accesorios SparkFun This is an extremely tiny and light weight battery based on the new Polymer Lithium Ion chemistry. This is the highest energy density currently in production. Each cells outputs a nominal 3.7V at 40mAh. This may sound like not so much power but the
Hoja de datos
SparkFun Accesorios SparkFun Copper tape has countless applications in electronics from creating low-profile traces for electrical components to RF-shielding and antenna-making. Copper tape is even used to join things together using solder like the stained glass on Tiffany lamp 305En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Brass Sponge 144En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Arduino Stackable Header - 8 Pin 1,413En existencias
Min.: 1
Mult.: 1

Connectors Headers & Wire Housings
SparkFun Accesorios SparkFun Antenna GPS Embedded SMA 74En existencias
49Se espera el 30/10/2026
Min.: 1
Mult.: 1
No
Passive Components Antennas
SparkFun Accesorios SparkFun Graphic Equalizer Display Filter
Hoja de datos
758En existencias
Min.: 1
Mult.: 1

Displays
SparkFun Accesorios SparkFun This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm). 1,282En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th 14En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Have you ever needed to power a project while in your car? Now you can without having to drag a computer along with this cost effective 5V 2.4A USB car charger. These car chargers have a standard USB 'A' connector for the output so you can power you 1,028En existencias
Min.: 1
Mult.: 1

Powers USB Car Charger - 5V, 2.4A
SparkFun Accesorios SparkFun LiPo Battery Manager Battery Manager 199En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun USB Mini-B Cable 6' Mini-B Cable 6'
Hoja de datos
28En existencias
Min.: 1
Mult.: 1

Cables
SparkFun Accesorios SparkFun This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield. 2En existencias
Min.: 1
Mult.: 1

Antennas LTE Antenna Duck SMA Male
SparkFun Accesorios SparkFun These are very small rare earth magnets - 0.125" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for 30En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun A simple slide potentiometer can go a long way. Rated at 10KOhm and 0.1W. Comes with solder tab connections. The pot has an overall travel of 20mm and has two mounting holes on top.Dimensions: 9.5mm x 35mmDocuments:Datasheet (C2031N-1A2-B10K-GP) 30En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well too bad you are getting two of each! The LED Rainbow Pack contains tw 10En existencias
Min.: 1
Mult.: 1
Optoelectronics LED
SparkFun Accesorios SparkFun Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore they can be used to either warm something up or cool something down depending on which side you use. Y
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Accessories Thermoelectric Cooler
SparkFun Accesorios SparkFun This is a tiny USB Microphone from Kinobo that plugs into your laptop desktop Raspberry Pi Jetson Nano Dev kit anything with a USB port you may be using as a computer to add microphone functionality. There is no need to install any extra software 15En existencias
Min.: 1
Mult.: 1
Electromechanicals Microphones
SparkFun Accesorios SparkFun Power Resistor Kit 10W (25 pack) 4En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board!Utilizes the extremely common KS0108B parallel interfac 3En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Through-hole RJ11 socket with PCB mounting posts. 6-pin connection - housing accepts common telephone connectors/wiring.If you need a board for this connector be sure to check out our SparkFun RJ11 Breakout. Two boards are included so be sure to buy 39En existencias
Min.: 1
Mult.: 1
Connectors
SparkFun Accesorios SparkFun USB Female Type B Connector 28En existencias
Min.: 1
Mult.: 1

Connectors USB Connectors
SparkFun Accesorios SparkFun Single row of 30-holes female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use the 141En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Hoja de datos
243En existencias
Min.: 1
Mult.: 1
Wire & Cable Jumper Wire