SparkFun Engineering Tools

Development Boards & Kits - AVR LilyPad Arduino 328 Main Board

Optical Sensor Development Tools The LilyPad Light Sensor is a sewable breakout board with an ALS-PT19 light sensor built in and ready to use right away. Each sensor outputs voltage between 0V and 3.3V depending on the level of ambient light shining on it. As more light is applied o

Security / Authentication Development Tools The SparkFun ATECC508A Cryptographic Co-Processor Breakout allows you to easily add strong authentication security to your IoT node edge device or embedded system. It includes two Qwiic ports for plug and play functionality. Utilizing our handy Qwi

Development Boards & Kits - ARM With a 32-bit ARM Cortex-M4F MCU the SparkFun MicroMod SAMD51 Processor Board is one powerful microcontroller packaged on a small board! The board provides you with an economical and easy to use development platform if you're needing more power with

Development Boards & Kits - ARM The MicroMod Qwiic Carrier Board can be used to rapidly prototype with other Qwiic devices. The MicroMod M.2 socket provides users the freedom to experiment with any processor board in the MicroMod ecosystem. This board also features two Qwiic connec

Security / Authentication Development Tools ???? Product Restrictions: To access certain features of the ATECC608A users will need to contact Microchip and sign an NDA contract to obtain the complete datasheet. Due to the required NDA - technical support an Arduino library and hookup guide

Multiple Function Sensor Development Tools The MyoWare 2.0 Link Shield is designed to easily connect a MyoWare 2.0 Muscle Sensor to your Arduino microcontroller. The shield provides a 3.5mm TRS jack so that you can use a 3.5mm TRS-to-TRS cable to link the boards together. The MyoWare 2.0 Li

Development Boards & Kits - ARM Meet the Teensy 4.1 without Ethernet (Headers) a streamlined high-performance development board that's ready to use out of the box. This version takes the record-breaking 600MHz speed and expands it for large-scale projects with pre-soldered heade

GNSS / GPS Development Tools The SparkFun NEO-M9N GPS Breakout with on-board chip antenna is a high quality GPS board with equally impressive configuration options. The NEO-M9N module is a 92-channel u-blox M9 engine GNSS receiver meaning it can receive signals from the GPS GL

Display Development Tools This compact OLED display packs a powerful punch transforming your creation with a crisp high-contrast 128x32 pixel canvas. Measuring just 0.91 inches this tiny display seamlessly integrates into your design while its low power draw ensures your

Power Management IC Development Tools The LiPower board is based on the incredibly versatile TPS61200 boost converter. The board is configured to be used with a LiPo battery has solder jumper selectable 5V and 3.3V output and an under voltage protection of 2.6V. However the board can

Optical Sensor Development Tools This version of the QRE1113 breakout board features a digital output using a capacitor discharge circuit to measure the amount of reflection. This tiny board is perfect for line sensing when only digital I/O is available and can be used in both 3.3