SparkFun Electronics Herramientas y suministros

Resultados: 972
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
SparkFun Accesorios SparkFun Thermocouple Type-K Glass Braid Insulate 38En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are very thin variable potentiometers. By pressing down on various parts of the strip the resistance linearly changes from 100Ohms to 10 000Ohms allowing the user to very accurately calculate the relative position on the strip. Can be used as 23En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a stainless steel Type-K Thermocouple probe. A thermocouple works by taking two wires made of dissimilar metals connecting them at the two ends and making a temperature gradient between one end and the other (a 'hot' end and a 'cold' one). 16En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is your basic tube of unleaded (Pb-free) solder with a no clean water soluble resin core. 0.031" gauge and 15 grams. Mix: 96.5% tin / 3.0% silver / 0.5% copper 8En existencias
15Se espera el 2/6/2026
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun High quality switching 'wall wart' AC to DC 9V 650mA wall power supply manufactured specifically for Spark Fun Electronics. These are switch mode power supplies which mean the output is regulated to 9V (no more 14V outputs!) and the capable output cu
Hoja de datos
7En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun PCB edge mount - SMA RF connector. Perfect for prototyping with the GPS and Cellular devices that require an antenna connection. These connectors have a female signal pin and will correctly mate with the original SMA type antennas. 11En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is an adapter that converts an RP-SMA board to an SMA antenna. The adapter will connect to any of our 2.4GHz wireless boards (Bluetooth Nordic or XBee) or interface cables and will allow you to use an antenna/cable with an SMA connection. You 18En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This sensor uses an infrared emitted diode combined with an infrared phototransistor to detect the reflected infrared signal. Ideal for sensing black-to-white transitions or can be used to detect nearby objects (.5-1cm). 1,282En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This disc load cell (sometimes called a strain gauge) can translate up to a whopping 200kg of pressure (force) into an electrical signal. Each load cell is able to measure the electrical resistance that changes in response to and proportional of th 14En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun USB Mini-B Cable 6' Mini-B Cable 6'
Hoja de datos
5En existencias
10Se espera el 9/6/2026
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are your standard issue USB 2.0 type A to micro USB 5-pin... but wait what's this? These cables have minor yet genius modifications that allow both ends to be plugged into their ports regardless of their orientation. No longer will you fight
Hoja de datos
14En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun This high-gain duck antenna is designed for LTE devices that operate in the 690-960MHz and 1710-2690 MHz bands. Combined with an SMA to U.FL Adapter this duck antenna works perfectly with our LTE Cat M1/NB-IoT Shield. 4En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun These are very small rare earth magnets - 0.125" cubed. Composed of Neodymium/Iron/Boron (NdFeB) these magnets are curiously strong and make for a great way to attach tools to a metal workbench hold small children to a fridge and as a trigger for 30En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple SPDT slide switch - great for use as an ON/OFF button or just as a general control switch. The pins are spaced by 0.1" however they are incredibly thin making breadboard use not recommended. The switch is rated for 0.3A at 50VDC. 336En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Sometimes when you have too many choices it's hard to make a good decision. In fact there are times when you just want a bag of LEDs just one of each that's all you want. Well too bad you are getting two of each! The LED Rainbow Pack contains tw 10En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Thermoelectric coolers (TEC or Peltier) create a temperature differential on each side. One side gets hot and the other side gets cool. Therefore they can be used to either warm something up or cool something down depending on which side you use. Y
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Power Resistor Kit 10W (25 pack) 8En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a framed graphical LCD 64x128 with LED backlight. This unit is a very clear STN type LCD with a simple command interface. This new module includes the negative voltage circuitry on board!Utilizes the extremely common KS0108B parallel interfac 3En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun Through-hole RJ11 socket with PCB mounting posts. 6-pin connection - housing accepts common telephone connectors/wiring.If you need a board for this connector be sure to check out our SparkFun RJ11 Breakout. Two boards are included so be sure to buy 84En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun USB Female Type B Connector 29En existencias
Min.: 1
Mult.: 1

SparkFun Accesorios SparkFun Single row of 30-holes female header with swiss round machined pins. These units have very high quality round pins to accept and retain machine pin headers much better. Can be cut to size with a pair of wire-cutters. Standard .1" spacing. We use the 196En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board. 2-pin JST connector on one end bare cable on the opposite end.Dimensions: 130mm lengthDocuments:JST connector
Hoja de datos
43En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This is a simple two wire cable. Great for jumping from board to board or just about anything else. There is a 2-pin Molex connector with 0.1" spacing on one end bare cable on the opposite end. It also comes with the mating connector for the Molex.D
Hoja de datos
243En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun This barrel jack plug is great for adding a common connector to the end of our wires. This jack is compatible with 5.5mm barrel jacks that have a 2.1mm center pole diameter. The outer shell unscrews to reveal solder terminals and a crimp strain relie 68En existencias
Min.: 1
Mult.: 1
SparkFun Accesorios SparkFun DC Barrel Power Jack Connector SMD
Hoja de datos
69En existencias
Min.: 1
Mult.: 1