Signal Conditioning

Marki Microwave Signal Conditioning products include catalog filters, diplexers, equalizers, power dividers, couplers, triple-balanced mixers, bias tees, double-balanced and I/Q mixers, limiters, multipliers, and baluns. The extensive portfolio includes multiple form factors, including die, surface-mount, and connectorized solutions, and spans frequencies from DC to sub-terahertz. Marki Microwave is dedicated to creating limitless possibilities, expanding the catalog, and empowering the industry to develop next-generation systems.

Resultados: 80
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS Modelo ECAD Tipo de producto
Producto
Frecuencia
Banda de frecuencias
Régimen de voltaje
Impedancia
Estilo de terminación
Temperatura de trabajo mínima
Temperatura de trabajo máxima
Marki Microwave Acondicionamiento de señales The MM1-0832L is a GaAs MMIC double balanced mixer that is designed for and operates at X through K bands. MM1-0832L is a low power K band mixer that works well as both an up and down converter.
Hoja de datos
5En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 12 GHz, 8 GHz to 32 GHz 0 Hz to 12 GHz, 8 GHz to 32 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MM2-0530L is a passive MMIC triple balanced mixer. It features a broadband IF port that spans from 2 to 20 GHz, and has excellent spurious suppression. The MM2-0530L is available as a wire bondable chip or connectorized SMA package.
Hoja de datos
5En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MMIQ-0416L is a low LO drive, passive GaAs MMIC IQ mixer. This is an ultra-broadband mixer spanning 4 to 16 GHz on the RF and LO ports with an IF from DC to 6 GHz.
Hoja de datos
3En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The PBR-0003 is a 300 kHz to 3 GHz high isolation power combiner. This power combiner features a unique hand tuned construction based on a bridge coupler that enables 45 dB typical isolation across the operational bandwidth.
Hoja de datos
5En existencias
Min.: 1
Mult.: 1

Signal Conditioning Power Combiners Connector
Marki Microwave Acondicionamiento de señales The PBR-0006SMG is a 10 MHz to 6 GHz surface mount high isolation power combiner. This power combiner features a unique hand tuned construction that enables 35 dB typical isolation across the operational bandwidth.
Hoja de datos
10En existencias
Min.: 1
Mult.: 1

Signal Conditioning Power Combiners 10 MHz to 6 GHz 10 MHz to 6 GHz SMD/SMT
Marki Microwave Acondicionamiento de señales The T3-1040G is a high performance mixer featuring LO/RF from 10 to 40 GHz and IF from 1 to 18 GHz.
Hoja de datos
4En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 10 GHz to 40 GHz Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The T3-12 is a high performance mixer featuring LO/RF from 10 MHz to 12 GHz and IF from 1 MHz to 4 GHz.
Hoja de datos
5En existencias
Min.: 1
Mult.: 1

Signal Conditioning Mixers 10 MHz to 12 GHz, 1 MHz to 4 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Hoja de datos
30En existencias
Min.: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Hoja de datos
10En pedido
Min.: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 10 MHz to 12 GHz bandwidth.
Hoja de datos
10Se espera el 17/8/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 10 MHz to 12 GHz 10 MHz to 12 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The BAL-0032SSG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over an industry leading 10 MHz to 32 GHz bandwidth.
Hoja de datos
Plazo de entrega no en existencias 12 Semanas
Min.: 1
Mult.: 1

Signal Conditioning Baluns 10 MHz to 32 GHz 10 MHz to 32 GHz - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A broadband balun, hand-tuned for optimal phase and amplitude balance over a 200 kHz to 6 GHz bandwidth.
Hoja de datos
6Se espera el 31/7/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 200 kHz to 6 GHz 200 kHz to 6 GHz 50 Ohms Connector
Marki Microwave Acondicionamiento de señales A broadband surface mount balun, hand-tuned for optimal phase and amplitude balance over a 500 kHz to 6 GHz bandwidth.
Hoja de datos
19Se espera el 17/8/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 500 kHz to 9 GHz 500 kHz to 9 GHz SMD/SMT
Marki Microwave Acondicionamiento de señales The BT-0018 is constructed using a custom-made, resonance-free conical inductor to achieve extremely broadband performance.
Hoja de datos
7Se espera el 7/7/2026
Min.: 1
Mult.: 1

Signal Conditioning Bias Tees 50 Ohms Connector
Marki Microwave Acondicionamiento de señales A packaged bias tee featuring excellent insertion loss and superior isolations over a broad 500 kHz to 12 GHz bandwidth.
Hoja de datos
10Se espera el 26/6/2026
Min.: 1
Mult.: 1

Signal Conditioning 500 kHz to 12 GHz 500 kHz to 12 GHz 30 V 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The CBR16-0003 offers the highest directivity of any standalone 3 GHz bridge coupler on the market. It provides an extremely high degree of measurement accuracy for forward power measurements, and can also be used to measure VSWR/return loss.
Hoja de datos
3En pedido
Min.: 1
Mult.: 1

Signal Conditioning 200 kHz to 3 GHz 200 kHz to 3 GHz Connector
Marki Microwave Acondicionamiento de señales A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC-10GHz bandwidth. It offers low insertion loss and excellent return loss from DC through X band and has a typical 1 dB compression point of 11 dBm.
Hoja de datos
134En pedido
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 10 GHz 0 Hz to 10 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales A high-power GaAs Schottky diode signal limiter featuring high IP3 over a broad DC - 40GHz bandwidth. It offers low insertion loss and excellent return loss from DC through Ka band and has a typical 1 dB compression point of +11 dBm.
Hoja de datos
79En pedido
Min.: 1
Mult.: 1
Signal Conditioning 0 Hz to 40 GHz 0 Hz to 40 GHz SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The HLM-8011 is a high-power GaAs Schottky diode signal limiter featuring high IP3 and high power handling. It offers low insertion loss and low return loss from DC through Ka band and has a typical 1dB compression point of +9dBm.
Hoja de datos
3Se espera el 29/5/2026
Min.: 1
Mult.: 1

Signal Conditioning 0 Hz to 30 GHz 0 Hz to 30 GHz Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
Hoja de datos
44Se espera el 26/6/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 2 GHz to 20 GHz 2 GHz to 20 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MBAL-0250CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 35 dB common mode rejection over a 2 to 50 GHz operational bandwidth.
Hoja de datos
43En pedido
Min.: 1
Mult.: 1

Signal Conditioning Baluns 2 GHz to 50 GHz 2 GHz to 50 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MBAL-0R106CSP2 is a GaAs passive MMIC 1:2 balun that features excellent 33 dB common mode rejection over a 0.1 to 6 GHz operational bandwidth. It is footprint compatible with the 1:1 MBALH-0R106CSP2, offering flexibility in system design.
Hoja de datos
25Se espera el 21/8/2026
Min.: 1
Mult.: 1

Signal Conditioning Baluns 100 MHz to 6 GHz 100 MHz to 6 GHz 50 Ohms SMD/SMT - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MM1-0626H is a passive double balanced MMIC mixer. It features excellent conversion loss, superior isolations and spurious performance across a broad bandwidth, in a highly miniaturized form factor.
Hoja de datos
10Se espera el 29/5/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 9 GHz, 6 GHz to 26.5 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales MMIQ-0218L is a low LO drive, passive GaAs MMIC IQ mixer that operates across a 9:1 bandwidth. This is an ultra-broadband mixer spanning 2 to 18GHz on the RF and LO ports with an IF from DC to 3 GHz.
Hoja de datos
3Se espera el 5/6/2026
Min.: 1
Mult.: 1

Signal Conditioning Mixers 0 Hz to 3 GHz, 2 GHz to 18 GHz 0 Hz to 3 GHz, 2 GHz to 18 GHz 50 Ohms Connector - 55 C + 100 C
Marki Microwave Acondicionamiento de señales The MPDW-0670CSP2 is a small footprint MMIC 6-70 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25Se espera el 1/6/2026
Min.: 1
Mult.: 1

Signal Conditioning Power Dividers / Power Splitters SMD/SMT - 55 C + 100 C