Todos los resultados (1,207)

A continuación, seleccione una categoría para ver las opciones de filtrado y reducir su búsqueda.
Seleccionar Imagen N.° de pieza
 Fabricante:
Descripción Hoja de datos Disponibilidad Precio: (USD) Filtre los resultados en la tabla por precio unitario en función de su cantidad.
Cantidad RoHS
Marki Microwave EVB-MFLP-00028
Marki Microwave Herramientas de desarrollo RF The EVB-MFLP-00028 is a connectorized evaluation board for the MFLP-00028CSP1 passive MMIC surface mount 10.7 GHz lowpass filter.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-1260FCSP2 is a small footprint MMIC 12-60 GHz 2-Way power divider/power splitter featuring high 22 dB isolation and low 0.3 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
28En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-1260SCSP2 is a small footprint MMIC 12-60 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 0.6 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
50En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD4-0422CSP2 is a small footprint MMIC 4-22 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
117En existencias
50Se espera el 31/7/2026
Min.: 1
Mult.: 1

Marki Microwave EVB-MFBP-00138P
Marki Microwave Herramientas de desarrollo RF The EVB-MFBP-00138P is a connectorized evaluation board for the MFBP-00138PSM passive MMIC surface mount 11.0-17.5GHz bandpass filter.
Hoja de datos
2En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD-0108SCSP2 is a small footprint MMIC 1-8 GHz 2-Way power divider/power splitter featuring high 23 dB isolation and low 0.9 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
13En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales This equalizer provides 7.8 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 10 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD4-0108CSP2 is a small footprint MMIC 1-8 GHz 4-Way power divider/power splitter featuring high 30 dB isolation and low 2.6 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
22En existencias
50En pedido
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF The EVB-MDPX-00007P is a connectorized evaluation board for the MDPX-00007PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 12 GHz and high frequency 14 to 28 GHz signals.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales This equalizer provides 4 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 6 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPD4-0R404CSP2 is a small footprint MMIC 0.4-4 GHz 4-Way power divider/power splitter featuring high 20 dB isolation and 3.4 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
23En existencias
Min.: 1
Mult.: 1


Marki Microwave Herramientas de desarrollo RF The EVB-MDPX-00004P is a connectorized evaluation board for the MDPX-00004PSM is a MMIC surface mount diplexer capable of multiplexing low frequency DC to 6 GHz and high frequency 8 to 28 GHz signals.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales This equalizer provides 2.6 dB positive slope equalization from DC to 60 GHz with a DC attenuation value of 4 dB and a 50-ohm match maintained over the entire operating range.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MBAL-0220CSP2 is a GaAs passive MMIC balun featuring a frequency range of 2 to 20 GHz. This balun offers low 1.9 dB insertion loss as a mode converter, excellent balance and 27 dB common mode rejection in a compact 2.5 mm CSP2 chip scale package.
Hoja de datos
39En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MPDW-0670CSP2 is a small footprint MMIC 6-70 GHz 2-Way power divider/power splitter featuring high 24 dB isolation and low 1 dB insertion loss in our compact CSP2 chip scale package.
Hoja de datos
25En existencias
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A high-linearity, high gain, low noise distributed amplifier capable of providing +23 dBm output power up to 38 GHz. When driven with an input power of 0 to +5 dBm, it can provide sufficient LO drive to power all H and most S diode mixers to 40GHz.
Hoja de datos
25En existencias
Min.: 1
Mult.: 1

Marki Microwave Acondicionamiento de señales The MBALH-0R520CSP2 is a GaAs passive MMIC 1:1 balun that features excellent 32 dB common mode rejection over a 0.5 to 20 GHz operational bandwidth. It is footprint compatible with the 1:2 MBAL-0R520CSP2, offering flexibility in system design.
Hoja de datos
1En existencias
50Se espera el 11/12/2026
Min.: 1
Mult.: 1

Marki Microwave EVB-MEQ3-20
Marki Microwave Herramientas de desarrollo RF The EVB-MEQ3-20 is a connectorized evaluation board for the MEQ3-20CSP1 passive MMIC surface mount 20 GHz equalizer.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave EVB-MEQ6-20
Marki Microwave Herramientas de desarrollo RF The EVB-MEQ6-20 is a connectorized evaluation board for the MEQ6-20CSP1 passive MMIC surface mount 20 GHz equalizer.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave EVB-MFLP-00011P
Marki Microwave Herramientas de desarrollo RF The EVB-MFLP-00011P is a connectorized evaluation board for the MFLP-00011PSM passive MMIC surface mount 7.1GHz lowpass filter.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Atenuadores The ATN01-0040PSM is a surface mount GaAs MMIC 1dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
Hoja de datos
14En existencias
50Se espera el 27/7/2026
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The MFBC-00001P is a connectorized evaluation board for the MFBC-00001PSM passive MMIC surface mount 7.40 9.90 GHz bandpass filters.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-MPDW-0670 is a connectorized evaluation board for the MPDW-0670CSP2 MMIC 6-70GHz 2-Way power divider/power splitter.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Herramientas de desarrollo RF The EVB-MFLP-00002P is a connectorized evaluation board for the MFLP-00002PSM passive MMIC surface mount 9.40GHz lowpass filter.
Hoja de datos
1En existencias
Min.: 1
Mult.: 1

Marki Microwave Amplificador de RF A low-cost, cascadable broadband InGaP HBT amplifier. This is a general-purpose gain block amplifier which provides high P1dB, high OIP3, and a very small form factor.
Hoja de datos
16En existencias
Min.: 1
Mult.: 1