LP3985IM5-3.3/NOPB

Texas Instruments
926-3985IM5-3.3/NOPB
LP3985IM5-3.3/NOPB

Fabricante:

Descripción:
Reguladores de tensión LDO 150Ma Low Noise CMOS LDO A 926-LP3985IM5 A 926-LP3985IM5X33NOPB

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 17,685

Existencias:
17,685 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
6 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:
Empaque:
Envase tipo carrete completo (pedir en múltiplos de 1000)

Precio (USD)

Cantidad Precio unitario
Precio ext.
Cinta cortada / MouseReel™
$0.91 $0.91
$0.66 $6.60
$0.594 $14.85
$0.523 $52.30
$0.489 $122.25
$0.468 $234.00
Envase tipo carrete completo (pedir en múltiplos de 1000)
$0.451 $451.00
$0.434 $1,736.00
$0.411 $3,288.00
† $7.00 Se agregará y calculará la tarifa de MouseReel™ en su carrito de compras. Ningún artículo de MouseReel™ se puede cancelar ni devolver.

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Reel, Cut Tape, MouseReel
Disponibilidad:
En existencias
Precio:
$0.53
Mín.:
1

Producto similar

Texas Instruments LP3985IM5X-3.3/NOPB
Texas Instruments
Reguladores de tensión LDO MicroPwr 150mA LDO C MOS Vtg Reg A 926-3 A 926-3985IM5-3.3/NOPB

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Reguladores de tensión LDO
RoHS:  
SMD/SMT
SOT-23-5
3.3 V
150 mA
1 Output
Positive
250 uA
2.5 V
6 V
50 dB
Fixed
- 40 C
+ 125 C
60 mV
LP3985
Reel
Cut Tape
MouseReel
Marca: Texas Instruments
Tensión de interrupción - Máx.: 0.002 V at 1 mA, 0.035 V at 50 mA, 0.07 V at 100 mA, 0.1 V at 150 mA
Ib - Polarización de entrada de tensión: 155 uA
Regulación de línea: 0.1 %
Regulación de carga: 0.0025 %
Corriente de suministro operativa: 85 uA
Dp - Disipación de potencia : 250 mW
Producto: Micropower CMOS LDO Regulators
Tipo de producto: LDO Voltage Regulators
Cantidad de empaque de fábrica: 1000
Subcategoría: PMIC - Power Management ICs
Tolerancia: 3 %
Tipo: Low dropout low quiescent current Regulator
Exactitud de regulación de voltaje: 2 %
Peso de la unidad: 39 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390090
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399999
ECCN:
EAR99

LP3985 Micropower Low-Dropout Voltage Regulator

Texas Instruments LP3985 Micropower 150mA Low-Noise Ultra Low-Dropout CMOS Voltage Regulator is designed for portable and wireless applications with demanding performance and space requirements. LP3985's performance is optimized for battery-powered systems to deliver ultra-low noise, extremely low dropout voltage, and low quiescent current. LP3985 offers up to 150mA guaranteed output, a 2.5V to 6V input range, fast turn-on timeless than 200μs, and consumes less than 1.5μA in disable mode. Performance is specified for a temperature range of −40°C to +125°C with 2.5V, 2.6V,2.7V, 2.8V, 2.85V, 2.9V, 3.0V. 3.1V, 3.2V, 3.3V, 4.7V, 4.75V, 4.8V and 5.0V output voltages. LP3985 is stable with a small 1μF ±30% ceramic or high-quality tantalum output capacitor. Regulator ground current increases only slightly in dropout to further prolong the battery life. An optional external bypass capacitor reduces the output noise without slowing down the load transient response. An internal power-on circuit actively pre-charges the bypass capacitor to achieve a fast turn-on time. Power supply rejection is better than 50dB at low frequencies and starts to roll off at 1kHz. High power supply rejection is maintained down to low input voltage levels common to battery operated circuits. Available in a 5-bump thin micro SMD and a 5-pin SOT-23 package, the device requires the smallest possible PC board area with a total application circuit area that can be less than 2.0mm x 2.5mm, a fraction of a 1206 case size. LP3985 is ideal for mobile phones and similar battery-powered wireless applications including CDMA cellular handsets, wideband CDMA cellular handsets, GSM cellular handsets, and portable information appliances.