LM3492MH/NOPB

Texas Instruments
926-LM3492MH/NOPB
LM3492MH/NOPB

Fabricante:

Descripción:
IC de controladores de iluminación LED 2-channel individual dimmable LED driver A 926-LM3492MHX/NOPB

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: IC de controladores de iluminación LED
RoHS:  
2 Output
Boost
50 mA to 200 mA
HTSSOP-20
65 V
4.5 V
200 kHz to 1 MHz
Adjustable
LM3492
- 40 C
+ 125 C
Tube
Marca: Texas Instruments
Reducción de luminosidad: PWM
Características: Adjustable Switch Frequency, Enable/Shutdown, Soft Start, Thermal Shutdown
Corriente de salida de nivel alto: 60 uA
Voltaje de entrada: 4.5 V to 65 V
Corriente de salida de nivel bajo: 56 uA
Estilo de montaje: SMD/SMT
Número de canales: 2 Channel
Tipo de salida: Current Mode
Tipo de producto: LED Lighting Drivers
Cantidad de empaque de fábrica: 73
Subcategoría: Driver ICs
Corriente de suministro - Máx.: 5.2 mA
Tipo: Inductive
Peso de la unidad: 81.800 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

Códigos de cumplimiento
CNHTS:
8542399000
CAHTS:
8542390000
USHTS:
8542390070
JPHTS:
854239099
TARIC:
8542399000
MXHTS:
8542399901
ECCN:
EAR99
Clasificaciones de origen
País de origen:
Malasia
País de origen del ensamblaje:
No disponible
País de difusión:
No disponible
El país está sujeto a cambios en el momento del envío.

IS32LT3175N/P Single-Channel Linear LED Drivers

ISSI IS32LT3175N/P Single-Channel Linear LED Drivers come with fade in/out and PWM dimming. The regulators serve as a stand-alone LED driver-configurable from 20mA to 150mA with external resistors, no microcontroller is necessary. A logic level “courtesy light” signal from the PWM pin can be interfaced to precisely drive the LED channel. The IS32LT3175P obtains a positive polarity PWM signal. In addition, the IS32LT3175N obtains a negative polarity PWM signal. The regulator integrates a 63-step fade-in and fades out the algorithm (Gamma correction). This causes the output LED current to increasingly rise up to the full source value after the EN pin is pulsed.

LM3492/LM3492Q Individual Dimmable LED Drivers

Texas Instruments LM3492/LM3492Q Individual Dimmable LED Drivers integrate a boost converter and a two-channel current regulator to implement a high efficient and cost-effective LED driver. This is used for driving two individually dimmable LED strings with a maximum power of 15W and an output voltage of up to 65V. The boost converter employs a proprietary Projected-On-Time control method to give a fast transient response.

En existencias: 471

Existencias:
471 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
9 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:

Precio (USD)

Cantidad Precio unitario
Precio ext.
$5.03 $5.03
$3.83 $38.30
$3.59 $89.75
$3.34 $243.82
$3.29 $3,362.38
$3.22 $8,227.10

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Reel, Cut Tape, MouseReel
Disponibilidad:
En existencias
Precio:
$4.27
Mín.:
1

Producto similar

Texas Instruments LM3492MHX/NOPB
Texas Instruments
IC de controladores de iluminación LED 2-channel individual dimmable LED driver A 926-LM3492MH/NOPB