ISO1042BQDWVQ1

Texas Instruments
595-ISO1042BQDWVQ1
ISO1042BQDWVQ1

Fabricante:

Descripción:
Interfaz IC CAN Automotive isolated CAN transceiver wit A 595-ISO1042BQDWVRQ1

Modelo ECAD:
Descargue Library Loader gratis para convertir este archivo para su herramienta ECAD. Conozca más sobre el modelo ECAD.

En existencias: 1,333

Existencias:
1,333 Se puede enviar inmediatamente
Plazo de entrega de fábrica:
12 Semanas Tiempo estimado de producción de fábrica para cantidades superiores a las que se muestran.
Mínimo: 1   Múltiples: 1
Precio unitario:
$-.--
Precio ext.:
$-.--
Est. Tarifa:

Precio (USD)

Cantidad Precio unitario
Precio ext.
$7.59 $7.59
$5.76 $57.60
$5.36 $134.00
$4.72 $472.00
$4.47 $1,144.32
$4.01 $2,053.12
$3.38 $3,461.12
$3.24 $8,294.40

Embalaje alternativo

N.º de artículo del Fabricante:
Embalaje:
Reel, Cut Tape, MouseReel
Disponibilidad:
En existencias
Precio:
$4.81
Mín.:
1

Producto similar

Texas Instruments ISO1042BQDWVRQ1
Texas Instruments
Interfaz IC CAN Automotive isolated CAN transceiver wit A 595-ISO1042BQDWVQ1

Atributo del producto Valor de atributo Seleccionar atributo
Texas Instruments
Categoría de producto: Interfaz IC CAN
RoHS:  
ISO1042
High Speed CAN Transceiver
SMD/SMT
SOIC-8
5 Mb/s
1 Driver
1 Receiver
1.71 V
5.5 V
- 40 C
+ 125 C
43 mA
16 kV
AEC-Q100
Tube
Marca: Texas Instruments
Tipo de interfaz: CAN
Tipo de aislamiento: Galvanic
Sensibles a la humedad: Yes
Voltaje de alimentación operativo: 1.71 V to 5.5 V
Dp - Disipación de potencia : 385 mW
Producto: CAN Transceivers
Tipo de producto: CAN Interface IC
Tiempo de retardo de propagación: 76 ns
Cantidad de empaque de fábrica: 64
Subcategoría: Interface ICs
Peso de la unidad: 392 mg
Productos encontrados:
Para mostrar productos similares, seleccione al menos una casilla de verificación
Seleccione al menos una de las casillas de verificación anteriores para mostrar productos similares en esta categoría.
Atributos seleccionados: 0

Esta funcionalidad requiere que JavaScript esté habilitado.

CNHTS:
8542399000
USHTS:
8542390090
ECCN:
EAR99

ISO1042 & ISO1042-Q1 Isolated CAN Transceivers

Texas Instruments ISO1042 and ISO1042-Q1 Isolated CAN Transceivers are galvanically-isolated controller area network (CAN) transceivers that meet the specifications of the ISO11898-2 (2016) standard. The ISO1042/Q1 device offers ±70VDC bus fault protection and ±30V common-mode voltage range. The device supports up to 5Mbps data rate in CAN FD mode allowing much faster transfer of payload compared to a classic CAN. The ISO1042/Q1 uses a silicon dioxide (SiO2) insulation barrier with a withstand voltage of 5000VRMS and a working voltage of 1060VRMS. Electromagnetic compatibility has been significantly enhanced to enable system-level ESD, EFT, surge, and emissions compliance. Used in conjunction with isolated power supplies, the device protects against high voltage and prevents noise currents from the bus from entering the local ground. The ISO1042/Q1 is available for both basic and reinforced isolation.